Alarm Lock ETPLN Guide de l'utilisateur télécharger pdf (Page 39)

DL-WINDOWS™ for Trilogy Networx™ V4.0 USER'S GUIDE 39

Tools > Select Network Adapter

The Network Adapter Selection screen allows you to identify the Ethernet "network interface card" (NIC) you are using in-

side your computer to communicate with the Gateway devices in your system. Some computers have a printed circuit

board that plugs into the motherboard, other computers have the network adapter (Ethernet) built into the motherboard, thus

precluding the need for a separate Ethernet card. Remember, the router or corporate Ethernet network is connected to this

Ethernet adapter with an Ethernet cable (RJ-45 plug).

To open this screen, click the GW Confg button to open the Gateway Configuration screen. Click

Tools, Select Network Adapter.

Click the pull-down menu to select the network card used in

the computer.

Click OK to save the selection or Cancel to exit without

saving. Note: Clicking OK in this dialog saves the selection

only for the duration of the current DL-Windows session.

Quitting and restarting DL-Windows may require re-opening

this dialog and re-selecting the network adapter.

Select Ethernet Adapter

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 67 68

Pas de commentaire

Alarm Lock ETPLN Guide de l'utilisateur Page 39