Alarm Lock NETWORXPANEL Manuel d'installation télécharger pdf (Page 13)

NX-4 Control

Page 11

PROGRAMMING EXAMPLE – FIGURE 1 (Numerical Data)

Zone 1 LED = 1

Zone 4 LED = 8

}

Data = 9

Zone 2 LED = 2

Zone 7 LED = 64

}

Data = 66

To change data in a

segment, enter the data

followed by []

Enters the previous

programming “location”.

Pressing [#] will exit a

location without

changing the data in

the current segment.

Advances to the next

programming “location”.

Returns to the “location” just

programmed.

PROGRAMMING EXAMPLE –

FIGURE 2

(Feature Selection Data)

Location 23  Segment 1

1 = Quick Arm

2 = Re-Exit

3 = Auto Bypass

4 = Silent Keypad Panic

5 = Audible Keypad Panic

6 = Keypad Auxiliary 1

7 = Keypad Auxiliary 2

8 = Multi-Keypad Tamper

Press the key on the numeric keypad that corresponds to the feature you wish to enable/disable. When an LED is

“on, a feature is enabled; when “off” the feature is disabled. For example: With the 1, 5, & 7 LEDs “on”, Quick Arm,

Audible Keypad Panic and Keypad Auxiliary 2 are enabled.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Pas de commentaire

Alarm Lock NETWORXPANEL Manuel d'installation Page 13