Alarm Lock DL 3000 Guide de l'utilisateur télécharger pdf (Page 14)

The DL-Windows software provides security and protection

features to restrict unauthorized persons from accessing your

DL-Windows program.

When starting DL-Windows, a user name and password are

required to access the program. Creating user names re-

quires a User Type be selected, (either Operator or Adminis-

trator). This User Type determines the range of tasks allowed

within DL-Windows. Creating authorized users should be the

first step in programming the DL-Windows software. Note:

For Operators, all administrative functions are grayed-out

within both the Global Users screen and the Options screen.

In addition, the functions listed below are accessible by Ad-

ministrators only:

1. Click Tools, Manage Users to open the Manage Users

screen.

2. In the Manage Users screen, click Action, Add User (or

press CTRL+A).

3. In the Add User dialog (shown below), type a User Name

and a Full Name in the fields provided (the User Name will

appear on the Log-On screen when starting DL-Windows).

4. Select the access level by checking either Operator or Ad-

ministrator in the User Type area. Users can be created

but disabled by simply un-checking Enable User.

5. Enter a password (at least 4 characters) in the Password

field and re-type the password in the Confirm field to ver-

ify.

6. When finished, click OK to save, or click Cancel to discard

your changes.

To edit existing users:

1. Either click Action, Edit User, press CTRL+ E, or double-

click the user to open the Edit User dialog.

2. All existing information can be edited, and when finished,

click OK to save or click Cancel to discard your changes.

To delete an existing user:

1. Click to highlight the user in the Manage Users screen.

2. Click Action, Delete User or press CTRL+ D.

3. A confirmation popup will appear.

4. Click Yes to confirm the deletion, and click No to retain the

user.

1. Click to highlight the user in the Manage Users screen,

then click Action, Set Password (or press CTRL+ P).

2. I n the Change Password dialog, type the existing pass-

word in the Old Password field, type a new password in

the New Password field and re-type the same new pass-

word in the Confirm field.

3. Press Enter on your keyboard to accept the changes.

DL-Windows can utilize a Security Password to safeguard

against an unscrupulous person with knowledge of your AL-

DTM or PC download code. The Security Password prevents

an unauthorized user from reprogramming your installed locks

with their own copy of DL-Windows. Entering this password

into DL-Windows prior to initial programming of your locks

copies the password to a special area within the locks. The

password never needs to be entered again. Subsequent com-

munication between DL-Windows, the AL-DTM and your locks

will automatically check for this password. If a different copy

of DL-Windows is used to program your locks, the passwords

will not match and no data transfer will take place. Once this

Security Password is stored within your installed locks, the

only way to change the Security Password is to erase all lock

programming for each lock (re-loading the factory default pro-

gram) and then re-program each lock with a new Security

Password.

The Security Password ensures that only your copy of DL-

Windows can communicate with your locks. The Security

Password also makes certain that your copy of DL-Windows

must be used to program the AL-DTM in order for it to ex-

change information with your locks.

If desired (but not recommended), the use of more than one

copy of DL-Windows is possible--provided that the same pass-

word is entered in all copies of DL-Windows.

To program the Security Password:

1. Click Tools, Set Security Password.

2. Before entering any information, be sure to write down the

password to be used and save in a secure location. Once

the Security Password is entered into the program, it can-

not be retrieved.

3. In the Set Security Password dialog, type a unique 6-

character password in the New Password field.

4. Re-type the same password in the Confirm field.

5. Click OK to save, or click Cancel to discard your changes.

DL-Windows Security Features

Security Features in DL-Windows

Adding Users (for access to DL-Windows software)

Editing and Deleting Users

Change an Existing Password

Security Password

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 55 56

Commentaires sur ces manuels

Pas de commentaire

Alarm Lock DL 3000 Guide de l'utilisateur Page 14

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Alarm Lock DL 3000