Alarm Lock Trilogy DL2800 Manuel d'instructions télécharger pdf (Page 9)

The Programming Level defines which Programming Func-

tions a User is allowed to perform. Each User Number is as-

sociated with a defined level of ability--a Programming Level-

-as to which Functions the assigned User can access. The

highest level--Master--allows access to ALL Functions.

In addition, each Function (see pages 14-26) has its own fixed

Programming Level.

 A User must possess a Programming Level equal to the

Programming Level of the Function in order to access that

Function.

Programming Levels can have a value of "1", "2", "3", "4" or

"M". Note: Having a Programming Level of "3" does not allow

access to Functions with Programming Levels of 1, 2 or 4.

The following defaults apply when adding User Codes via Pro-

gramming Function 2:

Master: The highest level User, and always associated with

User Number 1 and its Master Code only. Master is al-

ways enabled and can program ALL Functions.

(Abbreviated as the Programming Level = "M").

Manager: Always associated with User Numbers 2-6. Can

program all Functions except Functions relating to lock

configuration. (Abbreviated as Programming Level = "1",

"2" or "3").

Supervisor: Always associated with User Numbers 7-11.

Can only program Functions relating to certain day to day

operations. (Abbreviated as Programming Level = "1" or

"2").

Basic Users: Always associated with User Numbers 12

through 200. When adding User Codes for Basic Users via

Programming Function 2, Programming Levels are not as-

signed by default. Note: Programming Levels for Users 2-

200 can be assigned via Function 8.

Programming Levels

Users programmed with Function 2 will default to a Group

Association and a Programming Level Ability as follows:

USER TYPE USER NUMBER DEFAULT

GROUP ASSOCIATION

DEFAULT

PROGRAMMING LEVEL

Master Code 1 none M, 4, 3, 2, 1

Manager Codes 2 - 6 none 3, 2, 1

Supervisor 7 - 11 none 2, 1

Basic User Codes 12 - 50 none none

Basic User Codes Group 1 51 - 100 1 none

Basic User Codes Group 2 101 - 150 2 none

Basic User Codes Group 3 151 - 200 3 none

Initiate DTM (Non-Pass Code) 299 none none

Service Code 300 none none

User 299 is a Non-Pass Code. This is the only code that will initiate data transfer with the AL-DTM.

NOTE:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Commentaires sur ces manuels

Pas de commentaire

Alarm Lock Trilogy DL2800 Manuel d'instructions Page 9

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Alarm Lock Trilogy DL2800