Alarm Lock Trilogy DL2800 Manuel d'instructions Page 33

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 36
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 32
33
LOCK PROGRAM = A Lock Program is stored within the lock's circuitry
and contains the instructions that the lock uses to perform its various
functions. You can use the keypad to change the Lock Program, and
you can also use DL-Windows to create a Lock Program on your com-
puter, and then transfer and store the Lock Program within the lock.
LOCKOUT ATTEMPTS = A specified number of invalid User Code
entries (1-9), that will disable the keypad for a predefined period of
time (1-60 seconds).
LOCKOUT TIME = A predefined time (1-60) seconds that the lock will
stop accepting User Codes, after a specified number of invalid User
Code entries (1-9).
LOG = See... AUDIT TRAIL.
MANAGER = See... CODE, MANAGER CODE.
MASTER = See... CODE, MASTER CODE.
PASSAGE = Allow anyone to pass through the door without USER
CODES (lock remains unlocked thus allowing passage).
PRINTER = A printout device such as an infrared printer or computer
printer.
PROGRAM MODE = A mode allowing program/data to be entered
through the keypad. Only specific Users (Master, Managers and
Supervisors) can program a lock manually, by entering their USER
CODE, followed by the [;] key.
REMOTE INPUT = Entry into a restricted area, by pressing a button
connected to the REMOTE INPUT WIRES (White and White) by
someone on the other side of the door.
SCHEDULE = A programmed operation (enable/disable, lock/unlock,
etc.) on a specific day (Sunday through Saturday) and time.
SCHEDULES, QUICK = Any one of four most common types of sched-
ules can be programmed.
TIME = Hours and Minutes in the HHMM format.
TIME/DATE STAMP = A recorded date and time that an event oc-
curred.
TIMEOUT = Immediate operation for a specified number of hours.
UPLOAD = To send data from the AL-DTM or DL-Windows to the lock .
USER = A person who has been provided with a USER CODE for ac-
cess through the door.
USER LOCKOUT, TOTAL = All User Codes have been disabled, thus
"locking out" all Users (except for Master Code).
Glossary (cont'd)
Vue de la page 32
1 2 ... 28 29 30 31 32 33 34 35 36

Commentaires sur ces manuels

Pas de commentaire