Alarm Lock Eagle 6000 Manuel d'utilisateur télécharger pdf (Page 10)

ES2400 – ES2403 – ES4800 - ES6000

User's Manual

___________________________________________________________________________________________________________________________________________________

When the charge is complete, the charger switches off automatically, and the MRG front panel

will give the message “COMPLETE”:

OVERVOLTAGE PROTECTION

If, during the charge, the voltage of the battery will increase above 2,80 V/cell, the charger will

shut down automatically, and the MRG front panel will show the message “Voltage High”:

SAFETY TIMER – EMERGENCY STOP

The MRG controller includes a safety timer that shuts the charger down if the battery doesn't

reach the gassing voltage within a defined time limit. This time limit is not fixed, but it depends

on the finishing time selected by the user.

If this condition occurs, the MRG front panel shows the message “Time Error”:

The cause if this problem may be a wrong setting of the input voltage: if the input is set to a

certain value (for example: 610 V) but the real voltage is lower (for example: 575 V), the

charging current will be significantly lower than the nominal value, therefore the battery will

take too long to reach the gassing voltage.

__________________________________________________________________________________________________________________________________________________

Page 10/14

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Pas de commentaire

Alarm Lock Eagle 6000 Manuel d'utilisateur Page 10